Mcintosch MC 7106
MC 7106
SIX CHANNEL POWER AMPLIFIER The Compendium
FRONT PANEL: Glass with illuminated teal/gold nomenclature. Power indicator light.
Channel ONE and TWO POWER GUARD lights. Channel THREE and FOUR POWER GUARD
lights. Channel FIVE and SIX POWER GUARD lights. Six LED POWER LEVEL columns in
X10 increments from .01W to 100W for each channel.
BACK PANEL: POWER switch: ON or OFF/REMOTE. FUSE. Power cord. [Channels 6 and 5
section: INPUTS: 6 and 5 / BRIDGED. 6 and 5 / BRIDGED LEVEL controls:
2.5V to
1.0V THX.
MODE switch: NORMAL or BRIDGED. Speaker OUTPUTS terminals: 6 and 5]. DISPLAY
BRIGHTNESS control: MAXimum to OFF. POWER CONTROL jacks: IN and OUT. [Channels 4
and 3 section: INPUTS: 4 and 3 / BRIDGED. 4 and 3 / BRIDGED LEVEL controls:
2.5V to
1.0V THX. MODE switch: NORMAL or BRIDGED. Speaker OUTPUTS terminals: 4 and 3].
THX 25 pin INPUT connector. [Channels 2 and 1 section: INPUTS: 2 and 1 / BRIDGED. 2
and 1 / BRIDGED LEVEL controls:
2.5V to
1.0V THX. MODE switch: NORMAL or BRIDGED.
Speaker OUTPUTS terminals: 2 and 1].
SPECIFICATIONS: Six channels. 100w/ch into 8 ohms or 160w into 4 ohms. (300w
into 8 ohms mono with 2 channels bridged). Response: 20-20kHz (+0 -0.25dB).
Distortion: 0.005%. Noise and Hum: -113dBA. Output: direct coupled for 4 to 8
ohms. Damping Factor: 100 or greater. Input Impedance: 20k. Input
Sensitivity: 1v. Sentry Monitor. Power Guard. Direct coupled. THX approved